Can Your Vacuum Be Repaired?

Vacuum repair is relatively easy, but first, you need to diagnose the problem. Knowing the origin of the problem will lead to understanding the solution. Once you know the answer, you can make a quick fix or take your vacuum to get repaired at a vacuum shop.

Vacuum Repair Calgary

With proper attention, you will notice signs of wear immediately. These signs often mean that your vacuum needs proper servicing. If you are looking for a vacuum shop with a wide array of vacuum cleaners, vacuum services, and vacuum parts for some DIY repair, please visit Superior Vacuums.

Here are some of the most common problems, what they mean, and how to know if it's time to take your vacuum to the repair shop.

Power Issues/No Power

If your vacuum cleaner won’t start, then you have an obvious issue. First, check if your vacuum is correctly plugged in. Second, make sure that your wall outlet works. Sometimes the wall outlets stop working. Use a multimeter to check for continuity. Third, start the vacuum, and if the motor doesn't run, you need to identify whether there's a problem with the cord, maybe the prongs are bend, or if the problem is with the motor.

Some vacuums have sensors that won't allow the vacuum cleaner to start if the vacuum bag is missing or not in its proper place. Moreover, the issue can also be the internal wiring or a problem with the on/off switch. If you can't find the cause of the problem, consult with a repair shop.

Loss of Power/Overheating

Your vacuum starts without a problem, but it won't stay on. That is annoying, but usually, there's a good reason for that. Reason number one: overheating.

If your vacuum suddenly turns off, it means you have an airflow problem. Unplug it, and let it cool down. Then, do an inspection. Overheating can be caused by obstructions and clogs in the brush roll, overstuffed dust bag, clogged filters, or even bent wand. Once you've checked and cleared any potential blockages and the motor is cool, try again.

Loss of Suction

If your vacuum can't suck, then it's not doing its job properly. Before you take it to the vacuum shop, check for dirt and dust buildup in the dust bag. If you own a bagless model, make sure the garbage container is empty before you start vacuuming.

If there's still no suction, check all the filters on your vacuum. Most vacuums have several filters, which can become blocked over time. And last but not least, check the hose. A large piece of paper or cloth can block the suction entirely.

Unpleasant Smells

If you notice unpleasant smells coming out of your vacuum, change the garbage bag, and replace the exhaust filters. On the other hand, a burning smell can be caused by a wiring problem, a broken belt, or a problem with the motor. In any case, unplug the vacuum, change the vacuum parts, and start the vacuum again.

Strange Noises

From simple obstruction in the hose to severe issues with the motor, strange noises in your vacuum should not be ignored. Although vacuum cleaners are noisy appliances, when they become louder than usual, it means something it's not working correctly. If you can't find the problem within minutes, a trip to the repair shop is needed.

Conclusion

We hope this article will help you identify problems early and be proactive with your vacuum. Without a doubt, the vacuum cleaner is one of the essential appliances in our homes. This tool helps in keeping our leaving areas clean and spotless. Nevertheless, with time, vacuum parts can often break down or wear out.

Vacuum Shop in Calgary

Most vacuum repairs are simple, but they need to be done at a proper vacuum repair shop. Superior Vacuums offer a same-day repair option and can repair any make/model, as long as it's repairable. If not, buying a new vacuum cleaner is the next best thing.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


You may also like

View all
Example blog post
Example blog post
Example blog post